Work Procedure

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL


Work Procedure

1.INITIALIZATION
1. Fully close the back door manually. (When back door is already fully closed, this operation is not necessary)
2. Perform automatic back door open/close operation of back door.
3. Check for noise or malfunctioning during operation.
4. Check that hazard lamp blinks and warning buzzer operates.

NOTE:
Never touch back door, or allow foreign materials to be pinched in back door, when performing automatic back door open/close operation of back door, until it is in the fully closed or fully open position.
- WORK END