Disassembly And Assembly

CENTER CONSOLE ASSEMBLY


Disassembly and Assembly


CAUTION:
When disassembling, always use a remover tool that is made of plastic.

Disassembly and Assembly of Center Console Assembly

DISASSEMBLY
1. Remove center console assembly. Removal And Installation.





2. Remove console mask.
1. Open console lid.
2. Remove console mask fixing clips with remover tool (A).
3. Pull console mask up and back.
4. Disconnect cool box switch connector (with Cool box).

Circle : Clip


CAUTION:
Apply protective tape (B) on the part to protect it from damage.
3. Remove console lid assembly mounting screws (A) and (B), and then remove console lid assembly.





4. Remove console box fixing screws, and then remove console box.

ASSEMBLY
Assemble in the reverse order of disassembly.

Disassembly and Assembly of Console Finisher Assembly

DISASSEMBLY
1. Remove console finisher assembly. Removal And Installation.
2. Remove console pocket assembly fixing screws, and then remove console pocket assembly.
3. Remove cup holder assembly fixing screws, and then remove cup holder assembly.
4. Remove console power socket. Removal And Installation.
5. Remove 4WD switch assembly (2WD: SNOW MODE/TOW MODE/VDC OFF switch assembly). .

ASSEMBLY
Assemble in the reverse order of disassembly.