Vehicle Speed Sensing Auto Lock Operation Does Not Operate

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE





Diagnosis Procedure
1.CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"
1. Select "DOOR LOCK" of "BCM" using CONSULT-III.
2. Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC LOCK/UNLOCK SELECT" setting in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "Lock Only" or "Lock/Unlock" in "WORK SUPPORT".
2.CHECK "AUTOMATIC DOOR LOCK SELECT" SETTING IN "WORK SUPPORT"
1. Select "DOOR LOCK" of "BCM" using CONSULT-III.
2. Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC DOOR LOCK SELECT" setting in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "VH SPD" in "AUTOMATIC DOOR LOCK SELECT".
3.REPLACE BCM
- Replace BCM. Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Intermittent Incident.