Inspection Procedure

LARGE ROLL ANGLE


Inspection Procedure

1.CHECK APPEARANCE
1. Visually check that the exterior parts (e.g. suspension spring) have no malfunctions.
2. Visually check tube and pipe for crush or oil leakage.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace damaged parts.
2.CHECK NEEDLE VALVE OF PPMU





Check that needle valves A and C are tightened to the specified torque.

Tightening torque : 8.3 N-m (0.85 kg-m, 73 in-lb)

Is the inspection result normal?
YES - GO TO 3.
NO - Tighten to the specified torque.
3.SYSTEM PRESSURE CHECK
Check system pressure. Check System Pressure.
Is the inspection result normal?
YES - GO TO 4.
NO - Perform adjustment of system pressure. Air Bleeding Method.
4.CHECK INTERNAL LEAKAGE
Check internal leakage. Check Internal Leakage.
Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 5.
5.CHECK MALFUNCTIONING PART
Identify malfunctioning part. Check For Malfunction.
Does the pressure increase?
YES - Replace the PPMU. Exploded View Removal And Installation, "PPMU, MIDDLE TUBE ASSEMBLY, PPMU PIPE :
Removal and Installation".
NO - GO TO 6.
6.CHECK SHOCK ABSORBER
Identify malfunctioning shock absorber. Check Shock Absorber For Malfunction.
- Replace identified shock absorber. Removal and Installation (front), Exploded View Removal And Installation, "Removal and Installation" (rear).