A/T Position

A/T POSITION


Adjustment

1. Shift selector lever in "P" position.





2. Loosen nut (1).
3. Turn the manual lever (2) all the way in the "P" range direction
[ (A)].
4. Hold and push the control cable (3) in the vehicle front direction
[ (B)], and tighten the nut by hand with cable set in free condition.

CAUTION:
Be careful not put any load to manual lever.

NOTE:
Press control cable with a force of 9.8 N (approximately 1 kg, 2.2 lb).
5. Tighten nut to specified torque. Exploded View.