Rear Camera

REAR CAMERA

Removal and Installation


REMOVAL

1.Remove back door finisher inner. Exploded View.
2.Remove back door outside finisher upper. Exploded View.
3.Remove back door outside finisher lower. Exploded View.
4.Remove rear camera mounting screws and rear camera harness connector.
5.Remove rear camera.

INSTALLATION

1.Install in the reverse order of removal.
2.Perform camera image calibration. Special Repair Requirement.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.