Removal and Installation

PARKING BRAKE CONTROL

Removal and Installation


REMOVAL

1.Remove rear tires with power tool.
2.Remove instrument lower panel LH. Exploded View.
3.Disconnect parking brake switch harness connector.
4.Remove adjusting nut and loosen front cable.
5.Remove device assembly.
6.Remove center console. Exploded View.
7.Remove rear ventilator duct (with rear ventilation). Exploded View.
8.Remove the center muffler and heat insulator. Exploded View.
9.Separate front cable from rear cable, and remove front cable and spring.
10.Remove parking brake shoe, and remove rear cable from toggle lever. Exploded View.
11.Remove rear cable mounting bolts and nuts, pull out rear cable from vehicle.

INSTALLATION

Install in the reverse order of the removal.