Assembly

HIGH AND LOW REVERSE CLUTCH

Assembly






1.Install high and low reverse clutch component part (dish plate, drive plates, driven plates and retaining plate) to high and low reverse clutch drum.






CAUTION:
Check the order of plates.





2.Install snap ring to high and low reverse clutch drum using a flat-bladed screwdriver.

CAUTION:
- Be careful not to scratch high and low reverse clutch drum.
- Be careful not to damage snap ring.





3.Install bearing race to high and low reverse clutch drum.

CAUTION:
Check the direction of bearing race. Location Of Needle Bearings And Bearing Races.