Removal And Installation

SIDE CAMERA LH

Removal and Installation


REMOVAL

1.Remove glass mirror (driver side). Without ADP (without ADP), {LINK_TO_MANY:0000000007513785}{LINK_TO_MANY:0000000007513786}{LINK_TO_MANY:0000000007513787}, "Exploded
View" (with ADP).





2.Remove screws (A), and actuator connector, and then actuator (1).
3.Remove door mirror cover. Without ADP (without ADP), With ADP
(with ADP).





4.Remove screws (A) and connector (1), and then remove side camera finisher assembly (LH).
5.Remove side camera (LH) mounting screws
6.Remove side camera (LH).

INSTALLATION

1.Installation is the reverse order of removal.
2.Perform camera image calibration. Work Procedure.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.