Removal And Installation

FLOOR TRIM

Removal and Installation


REMOVAL

1.Remove front seatback and seat cushion (LH/RH). Removal and Installation.
2.Remove rear seat cushion. Removal and Installation.
3.Remove accelerator pedal pad. With Distance Control Assist System.





4.Disengage clip of floor hook (1) with remover tool (A).





5.Remove foot grille (LH/RH). Foot Grille.
6.Remove front seat belt floor anchor bolt (LH/RH). Exploded View.
7.Remove center console assembly. Removal And Installation.
8.Remove rear floor duct 1. Rear Floor Duct 1.
9.Remove instrument lower cover (LH/RH), instrument lower panel (LH/RH) and instrument side finisher (LH/RH). Removal And Installation.
10.Remove yaw rate/side G sensor. Removal And Installation.
11.Remove diagnosis sensor unit. Removal And Installation.
12.Remove console rear bracket. Removal And Installation.
13.Remove floor harness mounting clamps.
14.Remove dash side finisher (LH/RH), front and rear kicking plate inner (LH/RH) and center pillar lower garnish (LH/RH). Removal And Installation.
15.Remove floor trim mounting clips and fixing nuts.





16.Remove floor trim from floor trim fixing clips (A) and remove floor trim.

INSTALLATION

Install in the reverse order of removal.