Removal And Installation

DOOR PARTING SEAL

Removal and Installation


REMOVAL

FRONT DOOR PARTING SEAL
1.Fully open front door.





2.With a remover tool (A), disengage the clips from the front door parting seal (1).






CAUTION:
- Disengage the clips slowly and carefully.
- Never pull the front door parting seal strongly.
3.Remove front door parting seal.
REAR DOOR PARTING SEAL (LOWER)
1.Fully open rear door.





2.With a remover tool (A), disengage the clips from the rear door parting seal (1).






CAUTION:
- Disengage the clips slowly and carefully.
- Never pull the rear door parting seal strongly.
3.Remove rear door parting seal.
REAR DOOR PARTING SEAL (FRONT)
1.Fully open front door.
2.Pull back rear door parting seal (front).

CAUTION:
Never bend the rear door parting seal strongly.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- When installing door parting seal, check that blind clips are securely fitted in door panel holes, and then press them in.
- When installing, visually check the door parting seal and the clips, then replace them with new parts if they are damaged.
- Replace double-faced adhesive tape with a new one, if the rear door parting seal (front) is reused.
- Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front)
with a double-faced adhesive tape remover, after removing rear door parting seal (front).
- Never wash the vehicle within 24 hours after installing so as to keep adhesive.