Diagnosis Procedure

TAKE AWAY WARNING DOES NOT OPERATE

PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure


1. CHECK POWER POSITION

Check if ignition switch position is changing or not.
Does ignition switch position change?
YES- GO TO 2.
NO- Check DTC for BCM. A L L Diagnostic Trouble Codes ( DTC ).

2. CHECK PUSH-BUTTON IGNITION SWITCH

Check push-button ignition switch.
Push-Button Ignition Switch.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Buzzer (Combination Meter).
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK COMBINATION METER DISPLAY

Check combination meter display.
Combination Meter Display Function.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
B2621 (instrument center).
B2623 (luggage room).
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.