Additional Service When Removing Battery Negative Terminal

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Work Procedure


1. INITIALIZATION

1.Fully close the back door manually. (when back door is already fully closed, this operation is not necessary)
2.Perform automatic back door open/close operation of back door.
3.Check for noise or malfunctioning during operation.
4.Check that hazard lamp blinks and that warning buzzer operates.
NOTE:
Never touch back door, or allow foreign materials to be pinched in door, when performing automatic back door open/close operation of back door, until it is in the fully closed or fully open position.
- WORK END