Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2013 >> QX56 AWD V8-5.6L (VK56VD) >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Control Module: Service and Repair




TRANSFER CONTROL UNIT

Removal and Installation


REMOVAL

1.Turn the ignition switch OFF.
2.Disconnect negative battery terminal.

CAUTION:
Wait for 5 seconds after turning ignition switch OFF.
3.Remove the glove box assembly. Refer to "Removal and Installation" Removal and Installation.
4.Disconnect the transfer control unit connector.
5.Move instrument lower cover to backward. Refer to "Removal and Installation" Removal and Installation.
6.Remove the transfer control unit.

INSTALLATION

Note the following, and install in the reverse order of removal.
- When replacing transfer control unit, perform writing unit parameter and initial calibration. Refer to "Work Procedure" Work Procedure.
pro multis · About Operation CHARM