Clutch: Specifications
DIMENSIONSClutch Set Force: 7208 N (6669 lbs.)
Spring Finger Height: 49.9 - 51.9mm (1.965 - 2.043 inch)
Outside Diameter: 260 mm (10.24 inch)
Inside Diameter: 170 mm (6.70 inch)
Plate Warpage:
Standard: 0.7 mm (0.028 inch)
Limit: 1.0 mm (0.039 inch)
Splined Hub Spline Wear:
Standard: 0.5 mm (0.020 inch)
Limit: 1.0 mm (0.039 inch)
Rivet Head Depression:
Flywheel Side:
Standard: 1.2-1.8 mm (0.047-0.071 inch)
Limit: 0.2 mm (0.008 inch)
Pressure Plate Side: 1.6-2.2 mm (0.62-0.087 inch)
Thickness:
Clutch Disengaged: 8.6 mm (0.339 inch)
Clutch engaged: 8.0 mm (0.315 inch)
Total Friction Area: 304 x 2 cm2 (47 x 2 inch2)
Tightening Specifications
Pressure Plate Bolts In Sequence: 18 Nm (13 ft. lbs.)
Dust Cover To Housing: 6 Nm (52 inch lbs.)
Fulcrum Bridge Bolts: 38 Nm (28 ft. lbs.)