Parking Brake System: Description and Operation

General Description
Pulling up the parking brake lever by hand will set the parking brake. By means of a ratchet type lock, the lever can be held in that position until it is released. The position of the lever is transmitted through cable/lever systems to the rear wheels. These parts are designed to obtain sufficient braking force even when parking on slopes. When the parking brake is set, or when the ignition SW is in the "ON" position, the brake warning light illuminates. The rear wheel parking brake is a leading/trailing brake (mechanical inside expansion type). Parking brake adjustment is made through the adjusting hole (bored through back plate). Parking brake lever stroke should be adjusted to 6 notches.