General Service Precautions

General Service Precautions
The following are general precautions which should be observed when servicing and diagnosing the Intelligent Suspension Control and/or other vehicle systems. Failure to observe these precautions may result in Intelligent Suspension Control damage.
^ If welding work is to be performed on the vehicle using an electric arc welder, the Control Unit connectors should be disconnected before the welding operation begins.
^ The Control Unit connectors should never be connected or disconnected with the ignition "ON".

Parts Handling
Be careful when handling the actuator, control unit, or G-sensor. They should not be dropped or thrown, because the semi-conductor G-sensor tip damage may result.