Front Seat Assembly

Front Seat Assembly

Front Seat Assembly And Associated Parts:

Removal

1. Disconnect the battery ground cable.
2. Remove the front cover.
3. Remove the rear cover.
- Remove the cover fixing screw from the rear inner cover, if this model is equipped with the power seats.

4. Remove the door sill plate.
5. Remove the rear seat foot rest.
6. Remove the riser cover.
7. Remove the seat belt warning connector (Driver's side only).
8. Remove the front seat assembly.
- Disconnect the power seat connector, if this model is equipped with the power seats.

Installation

To install, follow the removal steps in the reverse order, noting the following points:
1. Tighten the front seat assembly fixing bolts to the specified torque.
Torque: 40 N.m (30 lb ft)

2. Install the longest bolt to the rear inner side fixing location, if this model is equipped with power seats.