With Tech 2 Scan Tool

Tech 2 Scan Tool





From 98 MY, Isuzu dealer service departments are recommended to use Tech 2. Please refer to Tech 2 scan tool user guide.

Getting Started
^ Before operating the Isuzu PCMCIA card with the Tech 2, the following steps must be performed:
1. The Isuzu 98 System PCMCIA card (1) inserts into the Tech 2 (4).
2. Connect the SAE 16/19 adapter (2) to the DLC cable (4).
3. Connect the DLC cable to the Tech 2 (4)
4. Make sure the vehicle ignition is off.





5. Connect the Tech 2 SAE 16/19 adapter to the vehicle DLC connector.
6. The vehicle ignition turns on.
7. Power up the Tech 2.





8. Verify the Tech 2 power up display.

Operating Procedure








The power up screen is displayed when you power up the tester with the Isuzu systems PCMCIA card
Follow the operating procedure.