Latch Replacement - Endgate Left Lower

Latch Replacement - Endgate Left Lower

Removal Procedure




1. Swing the endgate open.
2. Remove the endgate trim panel.
3. Remove the endgate inner reinforcement panel.
4. Remove the screws retaining the latch assembly (1) to the endgate.
5. Disconnect the electrical connector from the latch.
6. Remove the latch from the endgate.

Installation Procedure




1. Install the latch (1) to the endgate.
2. Connect the electrical connector to the latch assembly.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the screws retaining the latch assembly to the endgate.

Tighten the latch screws to 10 N.m (89 lb in).

4. Install the endgate inner reinforcement panel.
5. Install the endgate trim panel.