Exhaust Manifold Installation
Exhaust Manifold installation1. Install the exhaust manifold gasket.
2. Install the exhaust manifold.
3. Add threadlock to the exhaust manifold bolt threads.
4. Install the exhaust manifold bolts.
Notice: Refer to Fastener Notice in Service Precautions.
Exhaust Manifold Tightening Sequence:
5. Tighten the exhaust manifold bolts.
5.1. Tighten the exhaust manifold bolts a first pass in sequence to 25 Nm (18 ft. lbs.).
5.2. Tighten the exhaust manifold bolts a second pass in sequence to 25 Nm (18 ft. lbs.).
5.3. Tighten the exhaust manifold bolts a final pass in sequence to 25 Nm (18 ft. lbs.).
6. Install the exhaust manifold heat shield studs (if required).
^ Tighten the exhaust manifold heat shield studs to 10 Nm (89 inch lbs.).
7. Install the exhaust manifold heat shield.
8. Add anti-seize to the exhaust manifold heat shield nuts.
9. Install the exhaust manifold heat shield nuts.
^ Tighten the exhaust manifold heat shield nuts to 10 Nm (89 inch lbs.).