Steering - Steering Gear Stub Shaft Bearing Kit
2007 Service BulletinsInformation IB07-10-S001
Issue Date: APRIL 2007
Release Of Steering Gear Stub Shaft Bearing Kit (This Bulletin Supersedes
SB04-10-S002)
Affected Vehicles
2003-2007 Isuzu Ascender
Service Information
This bulletin is being revised to add model years.
NOTE:
Replace stub shaft bearing kit. Do NOT replace the steering gear assembly.
AIPDN has recently released a steering gear stub shaft bearing kit, P/N 8-26032-824-0, for service on the above-mentioned vehicles.
Previously, to correct a pinion seal leak or squeak, the steering gear assembly had to be replaced because the pinion stub shaft bearing, seal and seal retainer were not serviceable. Technicians may now order the kit instead of replacing the steering gear assembly.
Parts Information
This bulletin is intended for use by professional, qualified technicians. Attempting repairs or service without the appropriate training, tools, and equipment could cause injury to you or others and damage to your vehicle that may cause it not to operate properly.