Case Bushing
Case BushingRemoval Procedure
Tools Required
^ J8092 Driver Handle
^ J34196-B Transmission Bushing Service Set
1. Remove the case rear oil seal (106) (Y-car Only).
2. Remove the case bushing (7) using J8092 and J34196-10 which is part of kit J34196-B.
Installation Procedure
Tools Required
^ J8092 Driver Handle
^ J34196-B Transmission Bushing Service Set
^ J42198 Case Rear Oil Seal Installer
1. Install a case bushing (7) using J8092 and J34196-10 which is part of kit J34196-B.
2. Install a case rear oil seal (106) (Y-car Only) using J42198.