Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1992 >> Rodeo (2WD) V6-3137cc 3.1L (CPC) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Oxygen Sensor Life Indicator Light
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor Life Indicator Light

OXYGEN SENSOR LIFE INDICATOR LIGHT (O2) RESET PROCEDURE
At 90,000 mile intervals, the O2 sensor lamp will illuminate.
After replacing the sensor, perform the following procedure to reset the lamp.

Maintainence Reminder Light Reset:





- Remove instrument cluster.
- Remove masking tape from hole B.
- Remove screw from hole A and install into hole B.
- Apply new masking tape to hole A.
- Install instrument cluster.

NOTE: This procedure assumes that the sensor is being replaced for the first time (at 90,000 miles). For subsequent reset procedure (every 90,000 miles), hole positions will be the opposite of this procedure.
pro multis · About Operation CHARM