Mounting Torque Specs

Component Torque/Ft. lbs.
Catalytic Converter 25
3rd Crossmember Retaining Bolts 37
Exhaust Center Pipe Front Side Bolt 37
Exhaust Pipe To Exhaust Manifold 49
Flywheel Retaining Bolts 40-47 [01]
Front Crossmember Retaining Bolts 58
Front Propeller Shaft Retaining Bolts 46
Pressure Plate 13 [02]
Rear Engine Mount Retaining Nuts 37
Rear Engine Mount 30
Rear Propeller Shaft Retaining Bolts 46
Transmission To Engine Retaining Bolts 56

[01] -- Tighten in diagonal pattern. Do not reuse bolts & do not use Loctite when using M bolts.
[02] -- Tighten in diagonal pattern one or two turns at a time until seated, then apply final torque.