Blower Motor Switch: Service and Repair

Control Assembly and Blower Switch










Remove or Disconnect
1. Accessory trim plate.
2. Control assembly screws.
3. Control assembly.
4. Vacuum connectors, as necessary.
5. Electrical connectors, as necessary.










Install or Connect
1. Electrical connectors, as necessary.
2. Vacuum connectors, as necessary.
3. Control assembly.
4. Control assembly screws.

Tighten
- Screws to 1.9 N.m (17 lb in).

5. Accessory trim plate.
- Perform "Heater Function Test."