Cylinder Block Assembly

GENERAL SPECIFICATIONS
Cylinder Bore:
Diameter 88.991 - 89.009 mm (3.5036 - 3.5043 inches)
Out Of Round Max 0.013 mm (0.0005 inch)
Taper - Thrust Side Maximum 0.013 mm (0.0005 inch)

TORQUE SPECIFICATIONS
Rear Of Engine Block [1]:
Large Plug 33 Nm (24 ft. lbs.)
Small Plug 15 Nm (11 ft. lbs.)
Side Of Block Above Oil Filter Plug [1] 21 Nm (15 ft. lbs.)

[1] Oil gallery plug.