Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1998 >> Trooper LS V6-3.5L >> Repair and Diagnosis >> Heating and Air Conditioning >> Heater Core Case >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heater Core Case: Service and Repair







Heater Unit and Associated Parts

Removal
1. Disconnect the battery ground cable.
2. Drain the engine coolant.
3. Discharge and recover refrigerant (with air conditioning)
4. Remove the Instrument panel assembly. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel" Instrument Cluster / Carrier
5. Disconnect the water hoses at the heater unit.
6. Disconnect resistor connector.
7. Remove duct.
8. Remove evaporator assembly (A/C only).
9. Remove instrument panel center bracket.
10. Remove rear heater duct.
11. Remove heater unit assembly.
12. Remove driver lap vent nozzle.
13. Remove center ventilation lower duct.

Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. When handling the PCM and the control unit, be careful not to make any improper connection of the connectors.
2. Adjust the control lever assembly cables.
3. When installing the heater unit, defroster nozzle and center vent duct, be sure that the proper seal is made, without any gap between them.
pro multis · About Operation CHARM