Fuel Pump: Service and Repair

REMOVAL

CAUTION: When repair to the fuel system has been completed, start engine and check the fuel system for loose connection or leakage.

Fuel Pump And Associated Parts:

1. Disconnect battery ground cable.
2. Loosen fuel filler cap.
3. Drain fuel.

Tighten drain plug to the specified torque after draining fuel.
Torque: 20 Nm (14 lb ft) - M8

4. Remove fuel tank assembly (1). Refer to Fuel Tank.
5. Remove fuel pump (FP) assembly (2) fixing screws and remove the FP assembly.

NOTE: After removing FP, cover fuel tank to prevent any dust entering.

INSTALLATION

1. Install FP assembly (2).
2. Install fuel tank assembly (1). Refer to Fuel Tank.
3. Fill the tank with fuel and tighten fuel filler cap.
4. Connect battery ground cable.