Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Camber
The camber angle can be adjusted by means of the camber shims(2) installed in position between the chassis frame (1) and fulcrum pins.
Camber angle: 0° ± 30'
King pin inclination: 12°30' ± 30'
Left and right side must be equal within 30' Overall thickness of caster shim and camber shim should be 10.8 mm (0.425 inch) or less Tighten the fulcrum pin bolt to the specified torque.
Torque:
152 Nm (112 ft. lbs.)
