Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Axle Nut

Install hub nut by using wrench J-36827.
Turn the place where there is a chamfer in the tapped hole to the outer side, and attach the nut.

Preload Adjustment
1. Tighten the hub nut to 29.4 Nm (21.7 ft. lbs.), then loosen the nut to the full.
2. Tighten the hub nut to the value given below, using a spring scale on the wheel pin.

Bearing Preload

If the measured bearing preload is outside the specifications, adjust it by loosening or tightening the bearing nut.