Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1999 >> Rodeo LSE 2WD V6-3.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Speed Sensor: Service and Repair

REMOVAL

PREPARATION: Disconnect negative (-) battery cable.

1. Front console
2. Selector lever assembly
3. Wiring harness connector. Disconnect speed sensor harness connector from speed sensor.





4. Speed sensor. Remove one 10 mm screw and speed sensor with O-ring.

INSTALLATION

NOTE: To install, follow the removal steps in the reverse order.

1. Speed sensor:
a. Inspect speed sensor O-ring. Replace if necessary.
b. Install speed sensor assembly and 10 mm screw.
- Torque 9 Nm (78 inch lbs.).
2. Wiring harness connector. Connect speed sensor harness connector to speed sensor.
3. Selector lever assembly. Adjust shift lock cable.
4. Front console. Connect negative (-) battery cable.

pro multis · About Operation CHARM