Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1999 >> Rodeo LSE 2WD V6-3.2L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Arm >> Service and Repair >> Windshield Wiper Arm/Blade
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Wiper Arm/Blade

Removal




1. Dry the cap(2) off with the tip of a screwdriver.
2. Remove the nut.
3. Remove the wiper arm/blade(1).

Installation
To install, follow the removal steps in the reverse order, noting the following points:




1. Wiper arm/blade
- Before installing the wiper arm/blade to the shaft, confirm that the motor stops at the autostop position.
- Set the wiper arm/blade so that the tips of both blades are positioned about 40 mm (1.57 in) from the upper edge of the cowl cover as shown in the figure.
- Tighten the nuts to the specified torque.
Torque: 23 Nm (17 lb.ft)
pro multis · About Operation CHARM