Headlamp Wiper Motor: Service and Repair

Removal




1. Disconnect the battery ground cable.
2. Remove the wiper arm nut and then remove the wiper arm/blade (1).
3. Remove the headlight assembly (3).
4. Remove two nuts and a screw, and then remove the headlight wiper motor (2).

Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Tighten the wiper arm nut to the specified torque.
Torque: 5 Nm (43 lb. in)
2. Make sure that the motor stops at auto stop position prior to installing the wiper arm and blade to the motor shaft.