Air Temperature Sensor ( Ambient / Intake ): Service and Repair

INTAKE AIR TEMPERATURE (IAT) SENSOR

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the engine cover
3. The IAT sensor is located in the intake air duct, behind the throttle body.




4. Disconnect the electrical connector from the IAT sensor.
5. Remove the IAT sensor from the intake air duct by using a rocking motion while pulling the sensor.

INSTALLATION PROCEDURE
1. Install the IAT sensor into the grommet in the intake air duct.




2. Correct the IAT electrical connector.
3. Install the engine cover.
4. Connect the negative battery cable.