Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Rodeo S 2WD L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Idle Speed/Throttle Actuator - Electronic >> Testing and Inspection >> Measurement Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Measurement Procedure

Measurement Procedure





In order to install a new IAC valve, measure the distance between the tip of the pintle and the mounting flange. If that measurement is 28 mm or less, the valve need no adjustment. If the measurement is greater than 28 mm, apply finger pressure and retract the valve. The force required to retract the pintle on a new valve will not damage the valve, shaft or pintle.

NOTE: Do not push or pull on the IAC valve pintle on IAC valve that have been in service. The force required to move the pin tie may damage it.

IMPORTANT: Use an identical replacement part in order to replace a valve. IAC valve pintle shape and diameter are designed for the specific application.
pro multis · About Operation CHARM