Vehicle Damage Warnings

Before servicing or replacing lap and shoulder belts, including single loop seat belt systems, refer to the following precautions:

- Clean the seat belt webbing with a mild soap and water solution only. using a soft brush or cloth.
- Do not bleach or dye the seat belt webbing.
- Keep sharp edges and other damaging objects away from the seat belts.
- Replace any seat belts which are cut or damaged in any way.
- Do not bend or damage any portion of the seat belt buckle or the latch plate.
- Use only the correct seat belt anchor bolts and tighten them to the correct torque value.
- Start the anchor bolts by hand to ensure that they are not cross-threaded.
- Seat belts and retractors must be serviced as a set with service replacement parts only. Do not attempt to make repairs to the individual components.
- Verify that the replacement part number is correct for the vehicle at that seating position. Do not substitute a seat belt from a different seating position.
- Replace any seat belts which have a visible CAUTION label instructing replacement.