Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Rodeo S 2WD L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Service and Repair

REMOVAL
1. Raise the vehicle and support it on jack stands.
2. Disconnect battery ground cable.
3. Drain fluid.
4. Remove sixteen 10 mm adapter case oil pan fixing screws, adapter case oil pan, and gasket.
5. Disconnect wiring harness from shift solenoid, band apply solenoid, and 7 pin connector of main case. Pull only on connectors, not on wiring harness.





6. Remove wiring harness assembly with transmission oil temperature sensor.

INSTALLATION
1. Install wiring harness from shift solenoid, band apply solenoid, and 7 pin connector of main case.
2. Install oil pan gasket, oil pan and sixteen 10 mm fixing screws. Tighten the screws to the specified torque.

Torque: 11 Nm (96 Ft. lbs.)

3. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON III.
4. Connect battery ground cable.
pro multis · About Operation CHARM