Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Rodeo S 2WD L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Unit Overhaul >> TREMEC T5R Transmission >> Subassemblies >> Input Bearing Retainer
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Bearing Retainer





DISASSEMBLED VIEW

DISASSEMBLY





If you have not done so previously, remove these parts from the input bearing retainer (1):
- Bearing outer race (4)
- Shim (s) (3)





1. Remove the input shaft seal (2), using Input seal remover J-29369-2 and slide hammer J-23907.

REASSEMBLY





1. Install the input shaft seal (2) in the retainer (1), using the installer J-37375 and a soft-faced hammer.
2. Install the input bearing outer race (4) in the retainer (1) without the shim (3) behind it.
pro multis · About Operation CHARM