Console: Service and Repair

Consoles

Consoles and Associated Parts:

Removal

1. Disconnect the battery ground cable.
2. Remove rear console assembly.
- Disconnect the switch connectors and remove the four fixing screws.
- Remove the two screws to remove the rear console lid from the rear console assembly.
- Remove the ashtray from the rear console assembly.
- Remove the two screws to remove the ashtray case from the rear console assembly.
- Remove the four screws to remove the rear console garnish from the rear console assembly.

3. Remove the center console assembly.
- Remove the transfer control lever knob by turning it counterclockwise.
- Disconnect the mode selector switch connector and remove the four fixing screws.

4. Remove the center console bracket.
- Remove the two fixing screws.

5. Remove the rear console bracket.
- Remove the two fixing screws.

Installation
To install, follow the removal steps in the reverse order.