Air Register: Service and Repair

REAR HEATER DUCT, DEFROSTER NOZZLE AND VENTILATION DUCT

Rear Heater Duct, Defroster Nozzle, Ventilation Duct and Associated Parts:

REMOVAL

1. Disconnect the battery ground cable.

2. Remove instrument panel assembly.
- Refer to Instrument Panel Assembly in Body and Accessories.

3. Remove center ventilation duct and side defroster duct.
- Remove 5 screws.

4. Remove instrument panel brackets.
- Refer to Parts Location in Instrument Panel Assembly in Body and Accessories.

5. Remove cross beam assembly.
- Refer to Parts Location in Instrument Panel Assembly in Body and Accessories.

6. Remove ventilation lower duct.

7. Remove rear heater duct.
- Remove foot rest carpet and 3 clips.

8. Remove defroster nozzle.

INSTALLATION

To install, follow the removal steps in the reverse order, noting the following point:
1. Connect each duct and nozzle securely leaving no clearance between them and making no improper matching.