Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2001 >> Rodeo S 2WD L4-2.2L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Wheel Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Front Wheel Sensor






Removal
1. Remove speed sensor connector.
2. Remove sensor cable fixing bolt (Upper side).
3. Remove sensor cable fixing bolt (Lower side).
4. Remove the speed sensor cable fixing bolt.
5. Remove speed sensor.

Installation
1. Install speed sensor and take care not to hit the speed sensor pole piece during installation.
2. Install speed sensor fixing bolt and tighten the fixing bolt to the specified torque.
Torque: 11 Nm (95 inch lbs.)
3. Install speed sensor cable fixing bolt (Lower side) and tighten the fixing bolt to the specified torque.
Torque: 24 Nm (17 ft. lbs.)
4. Install speed sensor cable fixing bolt (Upper side) and tighten the fixing bolt to the specified torque.
Torque: 6 Nm (52 ft. lbs.)

Note: Confirm that a white line marked on the cable is not twisted when connecting the speed sensor cable.

5. Install speed sensor connector.
pro multis · About Operation CHARM