Campaign - Incorrect Dome Lamp Circuit: Overview

BULLETIN NUMBER:
SB00-04-S004

ISSUE DATE:
DECEMBER 2000

GROUP:
ELECTRICAL

MAP LIGHT SERVICE CAMPAIGN 00S-005

CAMPAIGN IDENTIFICATION NUMBER

Number 00S-005 has been assigned to this campaign. This number will appear on all communications and documentation of any nature dealing with the campaign.

AFFECTED VEHICLES


























All 2001 Rodeo S models with manually operated windows (see VIN list).

IMPORTANT:
Please verify affected VIN List to vehicle VIN.

SERVICE INFORMATION

Condition:
In 2001 Rodeo S models with manually operated windows, the Interior Mirror/Map Lights may stay ON continually even with the Dome Light in the OFF position. Over a prolonged period of time, this can cause the battery to lose power.

Cause:
This condition is due to an incorrect dome light circuit.

Correction:
Follow the procedures in this service bulletin for installing a resistor between the Alarm and Relay Control Unit and the Map Light Timer Control Unit.

DEALER RESPONSIBILITY

Isuzu dealers must service all affected vehicles at no charge to the owner, regardless of mileage, age of vehicle, or ownership.

Whenever a vehicle subject to this campaign is in a dealer's vehicle inventory, or arrives at a dealership for service, the dealer must take the necessary steps to ensure that this campaign correction has been made before selling or releasing the vehicle.

All unsold new vehicles in dealer's possession and subject to this campaign must be held and repaired per the service procedure in this Campaign Bulletin before customers take possession of their vehicles.

OWNER NOTIFICATION





American Isuzu Motors Inc. (AIMI) Will send a notification letter to owners of affected vehicles already retailed (See Copy). Dealers should follow tip with vehicle owners by sending a Campaign Reminder Notice (AIMI SVCF-1052) to all vehicle owners listed in the AIMI Campaign Report AWS 123-1A. Dealers may obtain these postcards from their Regional Office.

APPLYING THE CAMPAIGN LABEL





1. Using a ball-point pen, fill out the following information on a campaign label (Part Number: 2-90028-700-0)

^ This service campaign number: 00S-005
^ Dealer Code
^ Repair Date: (Month/Day/Year)

2. Affix the campaign label adjacent to the manufacturer's identification label located on the driver's side B-pillar.





PARTS INFORMATION

WARRANTY CLAIM INFORMATION





Use the new labor operation as shown.

Use Trouble Code 07 (Campaign Bulletin) for this Labor Operation.
Labor Time includes administrative time allowances.

WARRANTY CLAIM SUBMISSION INFORMATION





For your convenience please use the information when submitting your warranty claim as shown.