Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2001 >> Rodeo Sport 4WD V6-3.2L >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Door >> Service and Repair >> Heater Mode Control Link Unit
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heater Mode Control Link Unit

HEATER MODE CONTROL LINK UNIT

Disassembled View:






REMOVAL

1. Disconnect the battery ground cable.

2. Drain engine coolant.

3. Discharge and recover refrigerant (with air conditioning)
- Refer to Refrigerant Recovery.

4. Remove heater unit.
- Refer to Heater Unit.

5. Remove the case (Mode control) from heater unit.
6. Remove washer and the mode main lever.
7. Remove rod.




8. Press the tab of the sub-lever inward, and take out the sub-lever.
9. Pull out the door lever while raising up the catch of the door lever.
10. Remove clip.

INSTALLATION

To install, follow the remove steps in the reverse order, noting the following points:
1. Apply grease to the mode sub-lever and to the abrasive surface of the heater unit.
2. After installing the link unit, check to see if the link unit operates correctly.


pro multis · About Operation CHARM