Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2001 >> Rodeo Sport 4WD V6-3.2L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly: Service and Repair

Control Lever Assembly, Control Cable And Associated Parts:





CONTROL LEVER ASSEMBLY AND / OR CONTROL CABLE

REMOVAL

1. Disconnect the battery ground cable.
2. Remove instrument panel driver lower cover assembly.

3. Remove meter cluster assembly.
- Refer to Instrument Panel Assembly in Body and Accessories.

4. Remove glove box.
5. Remove the control lever attaching screws.




6. Pull the control lever assembly out and disconnect the fan switch and air conditioning switch connectors.
7. Remove control level assembly.




8. Disconnect control cables at each unit side

INSTALLATION

To install, follow the removal steps in the reverse order, noting the following points:




1. Adjust the control cable.
- Temperature control cable.
1. Turn the control knob to the left ("MAX COLD" position).
2. Connect the control cable at the COLD position of the temperature control link of the heater unit and secure it with the clip.

- Air select control cable
1. Turn the control knob to the right ("DEFROST" position).
2. Connect the control cable at the DEFROST position of the mode control link of the heater unit and secure it with the clip.

2. Check the control cable operation.



pro multis · About Operation CHARM