Lamps Test

This test is conducted check MIL and Low Fuel Lamp for its working.
Tech 2 must be used for this test.

Test Procedure:
1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.




3. Select F3: Miscellaneous Test in the Application Menu.




4. Select F0: Lamps Test in the Miscellaneous Test.




5. Select F0: Malfunction Indicator Lamp.
6. Push "On" soft key.
- Make sure Lamp illuminates.
- If lamp illuminates, the Lamp is operating correctly.




7. Select F2: Up Shift Lamp
8. Push On of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.




9. Select F2: Low Fuel Lamp
10. Push On of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.




11. Select F3: Reduced Power Lamp

12. Push On of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.




13. Select F5: Cruise Control Lamp

14. Push On of soft key.
- Make sure Lamp illuminates.
- If Lamp illuminates, the Lamp is operating correctly.