Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2001 >> VehiCROSS 4WD V6-3.5L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Suspension >> Axle Nut
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Axle Nut





Install hub nut. Turn to the place where there is a chamfer in the tapped hole to the outer side, then attach the nut by using front hub nut wrench J-36827.





Preload Adjustment:
- Tighten the hub nut to 29 Nm (22 ft. lbs.), then fully loosen the nut.
- Tighten the hub nut to the value given below, using a spring scale on the wheel pin.

New bearing and New oil seal
- Bearing Preload: 20 - 25 N (4.4 lbs. -5.5 lbs.,)

Used bearing and New oil seal
- Bearing Preload: 12 - 18 N (2.6 lbs. - 4.0 lbs.)

If the measured bearing preload is outside the specifications, adjust it by loosening or tightening the bearing nut.
pro multis · About Operation CHARM