Lifting Instructions

CAUTION:

- If a lifting device other than the original jack is used, it is most important that the device be applied only to the correct lifting points. Raising the vehicle from any other point may result in serious damage.
- When jacking or lifting a vehicle at the frame side rail or other prescribed lift points, be certain that lift pads do not contact the catalytic converter, brake pipes or cables, or fuel lines. Such contact may result in damage or unsatisfactory vehicle performance.

Lifting Points And Supporting Point Locations:

Lifting Points and Supportable Point Locations

Lifting Point: Front:

Lifting Point: Front

- When using a floor jack, lift on the Convex portion of the skid plate.

Supportable Point: Front:

Supportable Point: Front

- Position the chassis stands at the bottom of the frame side member, behind the front wheel.

Lifting Point: Rear:

Lifting Point: Rear

- Position the floor jack at the center of the rear axle case when lifting the vehicle.

Supportable Point: Rear:

Supportable Point: Rear

- Position the chassis stands at the bottom of the frame side member, just behind the trailing link bracket.

Supportable Point: Rear:

Supportable Point: Rear

- Position the chassis stands at the bottom of the rear axle case.