Condenser Fan Motor: Service and Repair

Removal

1. Disconnect the battery ground cable.

2. Remove the front bumper assembly.
- Refer to Front Bumper in Body Structure section.

3. Remove the condenser air guide.
4. Remove the horn (RH).

5. Remove the condenser fan assembly.
- Disconnect the fan motor connector and remove the 3 fixing bolts.

6. Remove the shroud.
- Remove the 3 fixing nuts.
- Loosen the condenser fixing nut and disconnect the fan motor connector from bracket.

7. Remove the fan.
- Remove the fan fixing C-ring and plate.

8. Remove the condenser fan motor.

Installation

To install, follow the removal steps in the reverse order, noting the following point.
1. Route the fan motor harness in its previous position, and fix it securely with clip and bracket.