Sensor Signal Abnormality Criteria Using TECH 2

Sensor Signal Abnormality Criteria using Tech 2
1. While driving, the speed of one or two wheels is 25% or more higher or lower of that of the other wheels.
2. The speed of one or two wheels is 10 km/h (6 mph) or more higher or lower than that of the other wheels.
3. During steady driving, wheel speed changes abruptly.

*1 The vehicle must run on a level paved road.

NOTE:
^ Even after the faulty part the Warning Light (W/L) does not go out if the vehicle is at a stop.
^ Turn the ignition switch to the ON position and drive the vehicle at 12 km/h (8 mph) or higher to make sure that the warning light goes out.
^ It is important to verify that the correct tires are installed on vehicle.